Monday, 10 January 2011

  • The quick overview of the tube ice making machine

    First, this information is in relation to tube ice machine, if you need details in relation to ice machines, you will see such link: The essential guidebook for ice making machine installing


    The tube ice making machine is just one sort of the ice making machine The ice from this specific machine is definitely anomalous hollow and tubular hence most people identify the ice tube ice. In today's market, the tube ice making machine owns the benefit that its anti-melting is best because of its tiniest get in touch with spot. Therefore the food items refrigeration and reservation trades employ this machine frequently.
    The tube ice is the hard ice with water less than 2% and its outside typical diameter are ø:22mm, ø:29mm, ø:35mm and the length is 20-50mm. The inner dimension of the tube ice tend to be flexible with respect employing the ice making time and it truly is normally is available between oslash;5mm to 10mm. The exterior proportion of the per ton is 435 sq . meter.

    Theassortment:

    The tube ice making device is usually classified directly into two types consistent with its regular productivity( the working situation on such basis as the worldwide conventions is: 33 degree for the dry bulb temperature and 20 degree for water inlet temperature): the large-scale tube ice making machine and the small-scale tube ice making machine.
    • The daily yield of the small-scale tube ice making machine is from 1ton to 8tons and many of them are monomer.
    • The daily production of the large-scale tube ice making device is from 10tons to the 60tons at most and quite a few of them are usually compound type and have to be matched together with cooling tower.


    Thestructure:

    The primary structures of the tube ice making machine are condenser, evaporimeter, storage water tank, compressor, reservoir. The structure of the evaporimeter is easily the most complex part furthermore , as the needs for the precision is the highest and the fabrication difficulty is bigger. You can find only few large-scale ice making machine factories across the world having the power to acquire as well as product the tube ice making machine.

    Evaporimeter operating principle:

    The ice making part may be the evaporimeter and also the evaporimeter is consisting of several vertical and parallel steel tubes. The fluid director on top of the evaporimeter will spread to each and every tube equably as the spiral manner and also the superfluous water s going to be gathered through the water box in the bottoom the device and took out to the evaporimeter through the water pump.


    Other post related: The quick guide of the tube ice maker

  • The essential manual of ice making machine installing

    Just before browsing this article in relation to ice machine, you may even understand this We must recommend environmentally friendly protection


    Yesterday i set up an ice making machine that we bought 2 days ago in the surpermarket. However when i made a decision to make use of it, i fond it did not work even though i start the switch. i confirm the guide to determine where the difficulties.

    So i summed up several issues needs attention thar you might fulfill within the flowing while installing the machine and i expect individuals can help to save both time and effort after reading my passage

    Recently, the industry ice making machine is used widely because of its large usage amount and longer working time. So i will spend more moment to talk about it.



    The place of the installation:
    • You should set up the machine at the place without direct sunshine and excellent air flow as well as the environmental temperature are not able to below the outside temperature in winter because the water tube of the outside machine will freeze.
    • The minimum venting distance of the condenser is 1m away from the shelters. It is better that the space is bigger so the air could flow.
    • The ice maker should be placed on the ground solidly where there can not be the incline or you'll encounter the noise when it really works, what is much more, there would function as the water in the ice storage box and affect the quality of ice.
    • When the ice machine is settled down, confirm the appearance of the machine and wether you can find some thing in the falling ice tube and check the fan blade to find out wether they might turn normally.
    • Check all of the stop vale to view wether they are all opened and check the oil level of the compressor and keep it above the oil level. The oil is important factor for the service life of the compressor and so i hope people can spend much attention on the color of the oil and the oil level.
    • Check the voltage as the ice making machine must have its individual water vale and power supply to ensure that we can check it expediently.


    My own last blog post: The essential manual of ice machine installing


  • The fundamental guidebook about ice machine installation



    I bought an ice making machine two days ago and that i set up it the other day This early morning when i first turn on the switch, the equipment doesn't work i confirm the instructions to find out where the problems.

    So i summed up several issues needs interest thar you could meet within the flowing while installing the machine and we expect individuals can save both time and energy reading my passage

    Here i will emphasize the industry ice making machine mainly because its usage amount is larger and the operating period is longer so we've got to pay enough time on its installation

    Here is a different posting around ice machine: You need to recommend environmentally friendly security


    The place of the installation:
    • You should set up the equipment at the place without direct sunshine and great ventilation and the environmental temperature are not able to below the exterior temperature in winter since the water tube of the outside machine will freeze.
    • The minimum venting distance of the condenser is 1m away from the shelters. It is advisable that the space is bigger so the air could flow.
    • The ice maker should be placed on the floor solidly and there can not be the incline or you will see the noise when it truely does work, what is much more, there'd function as the water in the ice storage box and impact the quality of ice.
    • When the ice machine is settled down, check the appearance of the machine and wether you will find something in the falling ice tube and check the fan blade to view wether they are able to turn normally.
    • Check all the stop vale to determine wether they all are opened and look into the oil level of the compressor and ensure that it stays above the oil level. The oil is critical aspect for the service life of the compressor i really hope people can pay much attention on the colour of the oil and also the oil level.
    • Check the voltage for the reason that ice making machine ought to have its individual water vale and power supply to ensure that we can check it expediently.


    My own past content:


  • The fundamental guide about the ice maker installing

    Before looking at the article regarding agico ice machine, it's also possible to see this We must recommend environmentally friendly security


    I ordered an ice making machine 2 days ago and that i set up it the other day This early morning when i start up the switch, the equipment does not work i look into the instruction manuals to view where the difficulties.

    Consequently i decide to summarize several issues needs interest for guide in the flowing and i expect my initiatives can conserve time and energy individuals consumers.

    Here i will emphasize the industry ice making machine since its usage quantity is larger and the operating period is longer so we must pay enough time on its installation



    The place of the installation:
    • You should set up the machine at the place without direct sunshine and good ventilation as well as the environmental temperature can't below the outside temperature in winter because of the water tube of the outside machine will freeze.
    • The minimum venting distance of the condenser is 1m from the shelters. It is advisable that the space is bigger in order that the air could flow.
    • The ice maker should be placed on the floor solidly where there can not be the incline or there'll be the noise when it truely does work, what is a lot more, there would function as the water in the ice storage box and impact the quality of ice.
    • When the ice machine is settled down, confirm the appearance of the machine and wether you will find something in the falling ice tube and check the fan blade to discover wether they are able to turn normally.
    • Check all the stop vale to discover wether they are all opened and look into the oil level of the compressor and ensure that it stays above the oil level. The oil is vital factor for the service life of the compressor and so i hope people can spend much attention on the colour of the oil and also the oil level.
    • Check the voltage because of the ice making machine will need to have its individual water vale and power supply making sure that we are able to check it expediently.


    My last writing:


  • The fundamental manual about ice making machine installing

    Before looking at the content in relation to ice machine, also you can see this We will need to propose the environmental security


    Yesterday i set up an ice making machine which i bought 2 days ago within the surpermarket. However when i chose to use it, i fond it did not work even though i open the switch. i discovered the instructions and want to recognize in which would be the problems

    So i summed up several matters requirements interest thar you might meet within the flowing while installing the equipment and we wish individuals can conserve both time and energy after reading my passage

    Lately, the industry ice making machine can be used widely because of its large usage amount and longer working time. So i will spend more period to talk about it.



    The place of the installation:
    • You should set up the machine at the place without direct sunshine and great venting as well as the environmental temperature are not able to below the outside temperature in winter considering that the water tube of the outside machine will freeze.
    • The minimum venting distance of the condenser is 1m away from the shelters. It is advisable that the space is bigger so that the air could flow.
    • The ice maker should be placed on the ground solidly and there can not be the incline or you will have the noise when it functions, what is a lot more, there would be the water in the ice storage box and impact the quality of ice.
    • When the ice machine is settled down, look into the appearance of the machine and wether there are anything in the falling ice tube and look into the fan blade to view wether they are able to turn normally.
    • Check all the stop vale to view wether all of them are opened and look into the oil level of the compressor and keep it above the oil level. The oil is very important element for the service life of the compressor i really hope people can pay much attention on the color of the oil and the oil level.
    • Check the voltage because the ice making machine should have its individual water vale and power supply to ensure that we can check it expediently.


    My personal last content:


machineice7f1

  • Visit machineice7f1's Xanga Site
    • Member Since: 1/9/2011

Recommended

[no recommendations]

Groups

[no groups]